User Manual

Page | 3
Getting Started
Place the speakers in your preferred
position but within reach of wall
sockets.
Left and Right speakers can be identified by looking at the
rear of the cabinet.
With the mains socket in the OFF position, connect the a/
c lead to the speakers using only the supplied mains leads
and power supplies. Turn the mains socket ON.
To use your speakers with a PC or MAC
MAC set-up
1.Insert the USB connector from the transmitter to a free
USB socket on your MAC.
2.Go to System Preferences and under Hardware choose
Sound.
3.Click Output in Menu and choose USB headset.
PC set-up
1.Insert the USB connector from the transmitter to a free
USB socket on your PC or laptop.
2.Wait until the software has been installed, usually a
confirmation beep or message window alert.
If the above instructions do not work you may need to
do the following.
Click Start button on PC, go to the Control Panel, and
choose Sound & Sound Devices
Under Playback of Audio; Default unit choose USB headset.
If you are still having problems please contact
[e-mail].