User guide

7.4 Text Commands
Syntax in the tables below is given in hex, decimal and decimal with ASCII, in that order, one per line.
Table 13: Text Commands
Command Syntax Default Notes
Auto line wrap on FE 43
254 67
254 ’C’
On Enables line
wrapping (not
word wrap)
Auto line wrap off FE 44
254 68
254 ’D’
On Disables line
wrapping
Auto scroll on FE 51
254 81
254 ’Q’
Off Enables scroll at
bottom of screen.
Text will push
display up one
line to make room
for new line
Auto scroll off FE 52
254 82
254 ’R’
Off Disables auto
scroll. Text will
wrap to top left
and overwrite
existing text
Set cursor position FE 47 [col] [row]
254 71 [col] [row]
254 ’G’ [col] [row]
N/A Moves cursor
to the specified
column and row.
The cursor marks
the text insertion
point in this and
all commands
Send cursor home FE 48
254 72
254 ’H’
This command
moves the cursor
to the top left of
the display area
Block cursor on FE 53
254 83
254 ’S’
On Turns on the
blinking block
cursor
Block cursor off FE 54
254 84
254 ’T’
Turns off the
blinking block
cursor
Matrix Orbital VK204-25 25