Owner manual

Command DescriptionPage
Hex Dec ASCII
0x4F 79 “O” Auto Transmit Key Presses Off 34
0x51 81 “Q” Auto Scroll On 19
0x52 82 “R” Auto Scroll Off 20
0x53 83 “S” Blinking Block Cursor On 23
0x54 84 “T” Blinking Block Cursor Off 23
0x55 85 “U” Set Debounce Time 35
0x56 86 “V” General Purpose Output Off 30
0x57 87 “W” General Purpose Output On 30
0x58 88 “X” Clear Screen 20
0x59 89 “Y” Set VFD Brightness 38
0x60 96 “‘” Auto Repeat Mode Off 36
0x68 104 “h” Initialize Horizontal Bar 27
0x6D 109 “m” Initialize Medium Number 26
0x6E 110 “n” Initialize Large Numbers 27
0x6F 111 “o” Place Medium Numbers 26
0x73 115 “s” Initialize Narrow Vertical Bar 28
0x76 118 “v” Initialize Wide Vertical Bar 28
0x7C 124 “|” Place Horizontal Bar Graph 28
0x7E 126 “~” Set Auto Repeat Mode 36
0x91 145 Set and Save VFD Brightness 38
0x93 147 Set Remember 39
0xA4 164 Setting a Non-Standard Baud Rate 17
0xC0 192 Loading Custom Characters 25
0xC1 193 Saving Custom Characters 24
0xC2 194 Save Startup Screen Custom
Characters
25
0xC3 195 Set Startup GPO state 30
0xC8 200 Dallas 1-Wire Transaction 32
0xCA 202 Data Lock 40
Matrix Orbital VK204-25-USB 50