Owner manual

Description
Syntax
Page
Write Customer Data
Hexadecimal 0xFE 0x34 [data]
Decimal 254 52 [data]
ASCII 254 “4” [data]
42
Read Customer Data
Hexadecimal 0xFE 0x35
Decimal 254 53
ASCII 254 “5”
42
13.9 Miscellaneous
Description
Syntax
Page
Read Version Number
Hexadecimal 0xFE 0x36
Decimal 254 54
ASCII 254 “6”
42
Read Module Type
Hexadecimal 0xFE 0x37
Decimal 254 55
ASCII 254 “7”
43
13.10 Command By Number
Command DescriptionPage
Hex Dec ASCII
0x23 35 “#” Place Large Number 27
0x26 38 “&” Poll Key Press 34
0x33 51 “3” Changing the I
2
C Slave Address 16
0x34 52 “4” Write Customer Data 42
0x35 53 “5” Read Customer Data 42
0x36 54 “6” Read Version Number 42
0x37 55 “7” Read Module Type 43
0x39 57 “9” Changing the Baud Rate 16
0x3D 61 “=” Place Vertical Bar 29
0x40 64 “@” Changing the Startup Screen 20
0x41 65 “A” Auto Transmit Key Presses On 34
0x42 66 “B” Display On 37
0x43 67 “C” Set Auto Line Wrap On 21
0x44 68 “D” Set Auto Line Wrap Off 21
0x45 69 “E” Clear Key Buffer 35
0x46 70 “F” Display Off 38
0x47 71 “G” Set Cursor Position 21
0x48 72 “H” Go Home 22
0x4C 76 “L” Move Cursor Back 22
0x4D 77 “M” Move Cursor Forward 22
0x4E 78 “N” Creating a Custom Character 23
Matrix Orbital VK204-25-USB 49