Manual

Command DescriptionPage
Hex Dec ASCII
0x4F 79 “O” Auto Transmit Key Presses Off 36
0x51 81 “Q” Auto Scroll On 21
0x52 82 “R” Auto Scroll Off 22
0x53 83 “S” Blinking Block Cursor On 25
0x54 84 “T” Blinking Block Cursor Off 25
0x55 85 “U” Set Debounce Time 38
0x56 86 “V” General Purpose Output Off 32
0x57 87 “W” General Purpose Output On 32
0x58 88 “X” Clear Screen 22
0x59 89 “Y” Set VFD Brightness 41
0x60 96 “‘” Auto Repeat Mode Off 39
0x68 104 “h” Initialize Horizontal Bar 29
0x6D 109 “m” Initialize Medium Number 28
0x6E 110 “n” Initialize Large Numbers 29
0x6F 111 “o” Place Medium Numbers 28
0x73 115 “s” Initialize Narrow Vertical Bar 30
0x76 118 “v” Initialize Wide Vertical Bar 30
0x7C 124 “|” Place Horizontal Bar Graph 30
0x7E 126 “~” Set Auto Repeat Mode 38
0x91 145 Set and Save VFD Brightness 41
0x93 147 Set Remember 42
0xA4 164 Setting a Non-Standard Baud Rate 19
0xC0 192 Loading Custom Characters 27
0xC1 193 Saving Custom Characters 26
0xC2 194 Save Startup Screen Custom
Characters
27
0xC3 195 Set Startup GPO state 32
0xC8 200 Dallas 1-Wire Transaction 34
0xCA 202 Data Lock 43
Matrix Orbital VK204-25 53