User Manual

7.4 Text Commands
Syntax in the tables below is given in hex, decimal and decimal with ASCII, in that order, one per line.
NOTE The letter "R" in the “Default” column indicates that this state can be saved to
nonvolatile memory with the “Remember” command.
Table 16: Text Commands
Command Syntax Default Notes
Auto line wrap on FE 43
254 67
254 ’C’
On R Enables line
wrapping (not
word wrap).
Auto line wrap off FE 44
254 68
254 ’D’
Off R Disables line
wrapping.
Auto scroll on FE 51
254 81
254 ’Q’
On R Enables scroll at
bottom of screen.
Text will push
display up one
line to make room
for new line.
Auto scroll off FE 52
254 82
254 ’R’
Off R Disables auto
scroll. Text will
wrap to top left
and overwrite
existing text.
Set cursor position FE 47 [col] [row] 254 71
[col] [row]
254 ’G’ [col] [row]
Off R Moves cursor
to the specified
column and row.
The cursor marks
the text insertion
point in this and
all commands.
Send cursor home FE 48
254 72
254 ’H’
This command
moves the cursor
to the top left of
the display area.
Underline cursor on FE 4A
254 74
254 ’J’
Off R Turns on the un-
derline cursor.
Matrix Orbital PK162-12 30