Instruction Manual

13.9 Miscellaneous
Description
Syntax
Page
Read Version Number
Hexadecimal 0xFE 0x36
Decimal 254 54
ASCII 254 “6”
44
Read Module Type
Hexadecimal 0xFE 0x37
Decimal 254 55
ASCII 254 “7”
45
13.10 Command By Number
Command Description Page
Hex Dec ASCII
0x26 38 “&” Poll Key Press 35
0x33 51 “3” Changing the I
2
C Slave Address 15
0x36 54 “6” Read Version Number 44
0x37 55 “7” Read Module Type 45
0x39 57 “9” Changing the Baud Rate 15
0x3D 61 “=” Place Vertical Bar 30
0x40 64 “@” Changing the Startup Screen 20
0x41 65 “A” Auto Transmit Key Presses On 35
0x42 66 “B” Display On 39
0x43 67 “C” Set Auto Line Wrap On 20
0x44 68 “D” Set Auto Line Wrap Off 20
0x45 69 “E” Clear Key Buffer 36
0x46 70 “F” Display Off 40
0x47 71 “G” Set Cursor Position 21
0x48 72 “H” Go Home 21
0x4A 74 “J” Underline Cursor On 22
0x4B 75 “K” Underline Cursor Off 23
0x4C 76 “L” Move Cursor Back 22
0x4D 77 “M” Move Cursor Forward 22
0x4E 78 “N” Creating a Custom Character 24
0x4F 79 “O” Auto Transmit Key Presses Off 35
0x51 81 “Q” Auto Scroll On 19
0x52 82 “R” Auto Scroll Off 19
0x53 83 “S” Blinking Block Cursor On 23
0x54 84 “T” Blinking Block Cursor Off 23
0x55 85 “U” Set Debounce Time 36
0x56 86 “V” General Purpose Output Off 31
Matrix Orbital PK162-12 52