Instruction Manual

Syntax
Hexadecimal 0xFE 0xCB 0xF5 0xA0 [level]
Decimal 254 203 245 160 [level]
Parameters
Parameter Length Description
level 1 Sets the data lock level
Description This command will set and save the data lock level. See the Data Lock
section for more information.
Remembered Always
Factory Default 0
12 Miscellaneous
12.1 Introduction
This chapter covers the ’Report Version Number’ and ’Read Module Type’ commands. These commands
can be particularly useful to find out more information about the display module before contacting technical
support.
12.2 Read Version Number
Syntax
Hexadecimal 0xFE 0x36
Decimal 254 54
ASCII 254 “6”
Description This command will return a byte representing the version of the module,
see the following table as an example:
Hex Value Version Number
0x10 Version 1.0
0x20 Version 2.0
0x42 Version 4.2
This Command will work in TTL mode only
Remembered No
Matrix Orbital PK162-12 45