Instruction Manual

Syntax
Hexadecimal 0xFE 0x42 [min]
Decimal 254 66 [min]
ASCII 254 “B” [min]
Parameters
Parameter Length Description
min 1 Minutes before turning the display
on (0 to 100).
Description This command turns the display on after the [minutes] timer has expired
, with a one-hundred minute maximum timer. A time of 0 specifies that
the display should turn on immediately and stay on. When this command
is sent while the remember function is on, the timer will reset and begin
after power up.
Remembered Yes
Factory Default 0
10.3 Display Off
Syntax
Hexadecimal 0xFE 0x46
Decimal 254 70
ASCII 254 “F”
Description This command turns the display off immediately. The display will re-
main off until a ’Display On’ command has been received.
Remembered Yes
10.4 Set Brightness
Syntax
Hexadecimal 0xFE 0x99 [brightness]
Decimal 254 153 [brightness]
Parameters
Parameter Length Description
brightness 1 Display brightness setting (0 to
255).
Matrix Orbital PK162-12 41