Instruction Manual

5.5 Changing the Startup Screen
Syntax
Hexadecimal 0xFE 0x40 [chars]
Decimal 254 64 [chars]
ASCII 254 “@” [chars]
Parameters
Parameter Length Description
chars 80 Characters to display for the startup
screen.
Description In order to change the text that is displayed by the PK162-12 when it
starts up simply send the command bytes 254 64 followed by the char-
acters that you wish to display, starting from the top left. This command
will automatically line wrap the characters that are sent to it.
Remembered Yes
5.6 Set Auto Line Wrap On
Syntax
Hexadecimal 0xFE 0x43
Decimal 254 67
ASCII 254 “C”
Description Enabling Auto Line Wrap will allow the cursor to automatically wrap
over to the next line when the current line is full.
NOTE Line wraps may occur in the middle of a word.
Remembered Yes
5.7 Set Auto Line Wrap Off
Syntax
Hexadecimal 0xFE 0x44
Decimal 254 68
ASCII 254 “D”
Matrix Orbital PK162-12 20