User guide

Command DescriptionPage
Hex Dec ASCII
0x4A 74 “J” Underline Cursor On 20
0x4B 75 “K” Underline Cursor Off 20
0x4C 76 “L” Move Cursor Back 19
0x4D 77 “M” Move Cursor Forward 19
0x4E 78 “N” Creating a Custom Character 21
0x4F 79 “O” Auto Transmit Key Presses Off 31
0x50 80 “P” Set Contrast 36
0x51 81 “Q” Auto Scroll On 16
0x52 82 “R” Auto Scroll Off 17
0x53 83 “S” Blinking Block Cursor On 20
0x54 84 “T” Blinking Block Cursor Off 20
0x55 85 “U” Set Debounce Time 33
0x56 86 “V” General Purpose Output Off 27
0x57 87 “W” General Purpose Output On 27
0x58 88 “X” Clear Screen 17
0x60 96 “‘” Auto Repeat Mode Off 34
0x68 104 “h” Initialize Horizontal Bar 25
0x6D 109 “m” Initialize Medium Number 24
0x6F 111 “o” Place Medium Numbers 24
0x73 115 “s” Initialize Narrow Vertical Bar 25
0x76 118 “v” Initialize Wide Vertical Bar 26
0x7C 124 “|” Place Horizontal Bar Graph 25
0x7E 126 “~” Set Auto Repeat Mode 33
0x91 145 Set and Save Contrast 37
0x93 147 Set Remember 38
0x98 152 Set and Save Brightness 36
0x99 153 Set Brightness 36
0xA4 164 Setting a Non-Standard Baud Rate 14
0xC0 192 Loading Custom Characters 23
0xC1 193 Saving Custom Characters 22
0xC2 194 Save Startup Screen Custom
Characters
23
0xC3 195 Set Startup GPO state 28
0xC8 200 Dallas 1-Wire Transaction 29
0xCA 202 Data Lock 39
Matrix Orbital LK402-25 48