Quick Guide
Table Of Contents
- Safety and Compliance Information
- Regulatory Compliance
- FCC statements
- Battery Directive-2013/56/EC
- Default IP, Username and Password
- The default password is used for your first login. To ensure account security, please change the password after your first login. You are recommended to set a strong password (no less than eight characters).
- Packing List
- Appearance
- Mount Your Camera
- The preceding installation process is for concealed installation, during which holes are punched on the wall and cables are penetrated into the wall. If open installation is adopted, cables are not penetrated into the wall but threaded out from the outlet on one side of the base.
- Access Your Camera
9
5. Mount your camera onto
the wall and connect all
cables.
6. Rotate the antenna to
the antenna interface
according to clockwise
direction.
7. Adjust the monitoring
direction.
8. Power on your camera
and adjust images.
Knock the plastic rivets
into the guide holes and
ensure that they are
tightened up.
Locknut
Lead tapping screws through
the guide holes in the base
and fix them on the wall by
using a screwdriver.
Reset
Antenna InterfaceAntenna Interface
Antenna