User Manual

Matrix Light ML-SG4K LED Light ••• 9
 Safety and Warnings About Light Installation / Maintenance
⚠ Do not install in the places with excess oil, smoke, dampness, dust, or
rainwater.
⚠ If the inside of the device is exposed to oil or dampness, the oil for
dampness may cause an electrical shock and/or a fire.
⚠ Do not switch on the light close to the eyes on people or animals. Doing
so can damage their vision. Be especially careful when filming infants
not to point the light directly at their eyes and keep the light at least 2
meters away and always apply the diffuser(ML-DF3).
⚠ Do not switch on the light towards vehicle operators. Doing so can
distract them which may lead to an accident.
⚠ Do not block the front panel or vent of the light. Doing so will degrade
the life of LED module by raising the internal temperature and may cause
a fire.
⚠ Use only designated batteries as the power source. Using other power
equipment can cause malfunctions and creates risk of a fire occurring.
⚠ After using the light for five or more minutes, do not put your hands on
the light for a long time. Doing so you may get a low-temperature burn.
Please handle the light after it cools down in the case of overheating.
⚠ In case of water damage or case damage, turn off the power and unplug
the light. Do not attempt to power on the light again as it may cause
an electrical shock and/or fire. Please contact a service center.
⚠ Do not dismantle and/or modify the light. Doing so can cause an electric
shock and a fire hazard. If in need of repair, call a service center.
⚠ Do not store or use explosive sprays or flammable substances near the
light. Doing so can create an explosion and is a fire hazard.
⚠ Do not insert metal or flammable substances such as chopsticks, wires,
gimlets, paper, or matches into cooling vents or DC Power jack. Doing