User Manual

Matrix Light ML-SG4K LED Light ••• 14
••• CONTROL AND USAGE
Control and Usage •••
1. Power ON/OFF & indicator LED
- Press once to turn product on, press again to turn off
- Power button indicator LED becomes red when the light is connected with
the battery, indicating it is ready, and the LED turns off when the power
is on.
2. Dimming control button & indicator LED
- Press upper button to increase brightness by 10%, and press lower button
to decrease by 10%
- Upon pressing the button, the indicator LED blinks in blue.
- Keep pressing the upper or the lower button to adjust brightness quickly.
3. Previous settings
- When turning on the light, the previously used brightness comes on.
4. Battery level warning indicator
- When the battery level drops below 10%, warning indicators blink and
also indicators of the dimming buttons blink as well to alert users to
change the battery.
5. Power Button Locking
- Press the dimming down button and the power button for 3 seconds.
Then the power button is locked. In this locking mode, the power button’s
indicator LED blinks continuously. (In this mode you can’t turn on the LED