User Manual- ML-9

Matrix Light ML-9 LED Ring Light ••• 9
⚠ Do not block the front panel or vent of the light. Doing so will degrade the
life of LED module by raising the internal temperature and may cause a fire.
⚠ Use only designated batteries as the power source. Using other power
equipment can cause malfunctions and creates a risk of fires.
⚠ Do not put your hands on the light for a long time after using the light for
five or more minutes, as you may get a low-temperature burn. Please Handle
the light after it cools down in the case of overheating.
⚠ In case of water damage or case damage, turn off the power and unplug the
light. Do not attempt to power on the light again as it may cause an electrical
shock or fire. To resolve the problem, please contact a service center.
⚠ Do not dismantle or modify the light. Doing so can cause an electric shock
and is a fire hazard. If in need of repair, please call a service center.
⚠ Do not store or use explosive sprays or flammable substances near the light.
Doing so can create an explosion and is a fire hazard.
⚠ Do not insert metal or flammable substances such as chopsticks, wires,
gimlets, paper, or matches into cooling vents or DC Power jack. It can cause
an electric shock and a fire. If any foreign matter enters the light casing, turn
off the power, unplug the light, and contact a service center.
⚠ Avoid places with high humidity and extreme temperature changes. Humidity
and extreme temperature changes can cause mechanical malfunctions and
electric shocks. Using the product outdoor in storms can cause mechanical
malfunctions and electric shocks.
⚠ Do not clean with benzene or paint thinner as it will damage the LED light.
⚠ Keep small parts out of the reach of children. If they swallow any parts, please
consult a doctor immediately.
⚠ Do not touch the LED Light with wet hands. Doing so can cause an electric
shock. Store in a well-ventilated area after use.