User Manual- ML-9

Matrix Light ML-9 LED Ring Light ••• 17
1. Mount the ML-9 light unit to the female shoe of the camera utilizing the
ML-LB3 bracket.
2. If the camera is equipped with a male shoe, please use the appropriate
converter (ML-MSC1) or the screw (ML-SCR1) which are sold separately.
3. Use the Power Tap Connector cable (ML-PT3) to connect the light to the
12V DC output on the camera, or use Power Tap Connecter (ML-PT2) to
connect the light to the battery pack or 12V DC output port in V Mount
Adaptor. Please ensure the polarity of the power cable is correct. If the
polarity is switched, the light might not come on or have malfunctions.