User Manual- ML-9

Matrix Light ML-9 LED Ring Light ••• 20
••• How to use Accessories
Using the Tripod Adapter(ML-AT1) & L type Slide(ML-SL30) •••
Tripod Adapter (ML-AT1) and L type Slide (ML-SL30) will help you film more
conveniently.
1. Adjusting the length of the L-bracket Slide (ML-SL30)
a. Loosen the fastening screw.
b. Slide the bracket to the desired length
c. Tighten the fastening screw
⚠ CAUTION: It is possible to damage the attachment points on the camera as well as the
adapter when excessive load is placed on the slide. To reduce this risk always adjust
the slide as short as possible.
2. To use a Tripod with the Tripod Adapter (ML-AT1) Installed
a. Attach the Tripod Adapter to the bottom of the camera
b. Make sure the Adapter is fixed securely to the camera
c. Attach the assembly on to a tripod
⚠ CAUTION: Always minimize the slide length before attaching it on to a tripod
⚠ CAUTION: When you move camera attached on the tripod with ML-AT1, please hold the
tripod’s legs, not holding camera. Or the ML-AT1 may get damaged by the weight
of the heavy tripod.