User Manual- ML-9

Matrix Light ML-9 LED Ring Light ••• 13
Light Installation and Usage •••
1. Power and brightness switch
- Press once for power on, press again for power off
- Press and hold for more 3 seconds to enter remote operation mode.
(Doing so makes the LED light’s power switch synchronized with Que/Cut
button of camera.)
- Push up the switch to increase brightness by 10%, down to decrease by
10%.
- Keep pushing up or down to adjust brightness quickly.
2. Turbo mode and color temperature switch
- Press once to activate Turbo Mode, press again to deactivate
- Push up once to increase color temperature by 300K. Push down once to
decrease color temperature by 300K.
- Hold the switch up or down to rapidly change the color temperature.
3. Memory buttons
- Three most frequently used brightness and color temperature can be
stored in the three memory buttons.
- First, set the light to the color temperature and brightness you want to
store.
- After setting, choose one button from the 3 memory buttons and press
for 3 seconds to store the current value. When it is stored, the indicator
LED beside the memory button will blink.