User Manual - Ring Light

Matrix Light ML-115R LED Ring Light ••• 19
the Manual mode, press Power switch for 3 seconds again.
5. To synchronize the light and the ENG camera’s Cue/Cut button, turn the
light on, and set the ENG camera to Auto mode. Then set the light to the
Auto mode pressing the light’s Power switch for 3 seconds. To switch to
the Manual mode, press Power On/Off switch for 3 seconds again.
Installation on a Camera Using Supplied Battery •••
1. For use with cameras without a 12V DC output, such as SONY’s PMW-
EX1R or Canon’s 5D Mark III, the supplied battery (ML-BA12) must be used.
2. To use the supplied battery, fasten the battery to the camera using the
Tripod Adapter (ML-AT1) and the L-Type(ML-SL30) or C Type(ML-SL10)
Slide. Start by installing the Tripod Adapter (ML-AT1) to the camera using
the screw at the bottom of the adapter.