User Manual - Ring Light

Matrix Light ML-115R LED Ring Light ••• 15
- After setting, choose one button from the three memory buttons and
hold the button down for 3 seconds to store the current value. When it
is stored, the indicator LED beside the memory button will blink.
- If you want to get the stored value, press the button in which the settings
are stored. Then the light’s settings will be changed to the stored value,
and the indicator LED beside the memory button will turn on.
4. LED Indicators
There are indicators that display the color temperature, brightness, and the
operating condition at the back of ML-115R LED Ring Light. The features of
each indicators are shown below.
- Brightness and color temperature indicator LEDs
Consists of 10 brightness LED indicators and 11 color temperature LED
indicators showing current brightness and color temperature.
Color temperature LED indicators light up as the color temperature is
altered by controlling the color temperature switch.
Brightness LED indicators light up as the brightness is altered by
controlling the brightness switch.
Brightness and color temperature indicators LEDs
Memory indicators LED
Battery level warning LED
Power indicator LED
Turbo mode indicator LED
Manual/Auto indicator LED