User's Manual

2120
User Manual Series 2User Manual Series 2 PW07
REG ULATORY STATEMENTS
US
FCC STATEMENT
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment o and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
-Connect the equipment into an outlet
on a circuit dierent from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV
technician for help.
NOTE 2: Any changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
CANADA
IC STATEMENT
Model Name/Product Market Name: PowerWatch
Series 2
This device complies with Industry Canada
licence-exempt RSS standard(s): Operation is
subject to the following Two conditions:(1) this
device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
Nom du modèle / Nom du produit du marché:
PowerWatch Series 2
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée
aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le
fonctionnement.
CHINA
a) Manufacturer’s name: Matrix Industries Inc.
b) Manufacturer’s name & address: Matrix
Industries Inc. 1455 Adams Drive, Suite 1190 Menlo
Park, CA 94025 USA
c) Model Name/Product Market Name:
PowerWatch Series 2
EU
1. Safety
a) Product Type: Short range device
b) Software version: PowerWatch 2 Android App
v3.00.00; PowerWatch 2 IOS App v3.00.00
c) Number of equipment and key component
in the DOC is 2: PowerWatch Series 2 and
TC03(Wireless Thermal Charger)
d) Rated Voltage: 3.85V DC, Battery Type:
Lithium-ion Polymer (3.85V, 350mAh)
e) Model Name/Product Market Name:
PowerWatch Series 2
f) Made in China
g) Operation Temperature: -10oC to 45oC max
h) 20 ATM
i) Manufacturer’s name: Matrix Industries Inc.
j) Manufacturer’s name & address: Matrix
Industries Inc. 1455 Adams Drive, Suite 1190 Menlo
Park, CA 94025 USA
k) Importer Name: Matrix Industries Inc. Address
is: Nijverheidsweg 27, 3274 KJ Heinenoord
0186-612267, The Netherlands .VAT number is
NL825573026B01.
2. RF & EMC
CE-RED Requirement
1) Accessory: wireless charging pad model name:
TC03. Operation freq.: 150KHz. Operation power:
2.5W. Operation voltage: 5V
Maximum transmit power of WPT is -5dBuA/
m@10m.
2) Frequency band(s) = 2402-2480MHzlable
3) Maximum radio frequency power transmitted
in the frequency band(s) = 4dBm or 2.5mW
5) Declaration of Conformity Inserts:
Hereby, Matrix Industries Inc, declares that the
radio equipment type [designation of type of
radio equipment] is in
compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is
available at the followinginternetaddress: www.
powerwatch.com/declaration.pdf
7) This equipment may be operated in:
RUNNINGMODE STOPWATCH SYNCDATATOYOURSMARTPHONE AUTOSLEEPTRACKING NOTIFICATIONS
The PowerWatch X can track each run you take.
1. Press MODE until Running Mode screen appears.
2. Press SET to cycle through Start, Stop and Reset.
1. Press MODE until Stop Watch screen appears.
2. Press SET to cycle through Start, Stop and Reset
1. While under the Watch Settings menu, SCROLL until
the Mobile screen appears.
2. Press SET to sync.
See https://store.powerwatch.com/pages/f-a-q for more details. Display may update slowly, but Stop Watch result is accurate.See https://store.powerwatch.com/pages/f-a-q for more details.
The PowerWatch X automatically senses when you sleep
and wake.
1. Press MODE until Daily Activity screen appears.
2. Turn SCROLL to read Today’s Sleep data.
Incoming call
Activity goal met
Message received
Alarm ringing
1 1 112 2 22
REGULATORYSTATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the manufacturer responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
EUROPE (EU)
1.Safety:
a) Rated Voltage: 3.8V DC, 105mA
Battery Type: Lithium-ion Polymer (3.8V, 210mAh)
b) Model Name: PowerWatch X
Operation Temperature: 45C max
c)
d) Manufacturer’s name: Matrix Industries Inc
e) Manufacturer name & address: Matrix Industries
Inc. 1455 Adams Drive, Suite 1190 Menlo Park,
CA 94025 USA
f)
CANADA
This device complies with Industry Canada’s licence-exempt
RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device
must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes : (1) l’appareil ne doit
pas produire de brouillage, et (2) l’utilisateur de l’appareil doit
accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
JAPAN
CHINA
2. RF & EMC
• Frequency band(s) = 2402-2480MHz
• Maximum radio frequency power transmitted in
the frequency band(s) = -5.58dBm
• Declaration of Conformity Inserts
• Hereby, Matrix Industries Inc, declares that the
radio equipment type is in compliance with Directive
2014/53/EU. The declaration of conformity may be
consulted at www.powerwatch.com/declaration.pdf
• This equipment may be operated in:
Manufacturer’s name: Matrix Industries Inc.
FCC ID: 2ANY2MPW05
SUPPORT
Our Frequently Asked Questions (FAQ) page is lled
with detailed instructions, tips and warranty information:
https://store.powerwatch.com/pages/f-a-q
The Matrix PowerWatch X does not need charging under
normal use, which includes: adjusting the watch so it
stays in direct contact with the user’s wrist; limiting
Bluetooth and backlight activity while the watch is worn
on the user’s wrist; and not activating the watch
unnecessarily or repeatedly when it is not worn on the
user’s wrist. PowerWatch X rmware can be updated
through the app.
One Year Satisfaction Guarantee
See the FAQ and guarantee at
https://store.powerwatch.com/pages/f-a-q.
For questions or problems, contact us at
[e-mail]. Thank you!
TAIWAN
a) Manufacturer’s name: Matrix Industries Inc.
b) Manufacturer’s name & address: Matrix
Industries Inc. 1455 Adams Drive, Suite 1190 Menlo
CAUTION
RISK OF EXPLOSION IF BATTERY US REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS