Installation Instructions

3299 Tower Drive
Newburgh, IN 47630
812.490.1525
www.MatrixTeam.com
13
Preliminary
The controller will be able to distinguish between a machine operator and all other personnel.
Multi-Machine Operation
Shuttle car has to have the ability to approach the Miner without shutting either machine down while
maintaining safe distances for personnel. A button press by the operator will start the process of modifying or
reducing the zones.
Tests
Port Test: There shall be a port test on the machine. The boot sequence on the controller should run the port
test automatically for a configurable number of seconds.
Support
GUI communication will be provided in the form of a laptop operating on Linux or Windows. There will be wired
and wireless communications available on the controller. PWDs will have the ability to be updated over the air.
Logging
Logging will be provided in the system in the binary and text forms.
Can Bus
The CAN bus is used to communicate with the equipment the system is installed on. The CAN bus supports
multiple CAN protocols as needed for the installation.
Customer Support / Contact Information
For technical support or product returns, contact:
Matrix Design Group, LLC
3299 Tower Drive
Newburgh, IN 47630
Phone: [phone]