Installation Guide

Cold
Hot
1.Open holes [size of opening is (265-272)x
（92-96）x（52-57）mm (LxWxD)] and
embedded water pipes (hot and cold inlet
pipes, outlet pipes) as required; Install
the main body in the embedded hole and
connect the pipe.(10.43-10.7)x(3.62-3.77)x
(2.05-2.44)inch(LxWxD)
2.Fill the embedded hole after no water leakage,
and press the panel to the wall after removing the
protective cover.
Cold
Hot
Top shower
Hand held shower
3.Use the hexagon key to install the switch
handle and water separator handle and install
the color button.
4.Twist the shower stall onto the mounting
hole of the main body (pay attention to keep
it horizontal); Use the hose to twist the shower
stall and the hand held shower stall together.
5.Install the shower hose into the outlet
on the wall,Then connect the top shower
to the spout.
Adjustable Wrench Allen key
Philips Screwdriver
INSTALLATION MANUAL Tools You will need
Wall Mounted Basin Faucet Installation
Teflon Tape