» Installation Environment 1, Before installation, confirm whether the Inlet pipe and angle valve are corers, Make sure that the installation is completed, and the water has been flushed to ensure that there is no impurities in the water inlet pipe; 2. Water inlet pressure requirements: bar inlet pressure 20.5bar, iris recommended to install a pressure reducing valve if it is greater than 0.05MPa; 3. When installing and using the faucet, please use normal tongue to prevent the handle from breaking.
Thi pros es burn fiendish id Feint posing fhe Spaniels lassie De sae] Cloaking delivered by the factory To th best to venom sundries sd shed from the | edition, Please do not dosses Waite gripe to per saris from, Anne winnable i yourself, Diaghilev the Ascetic EVALUATION OF Thermos TILE Routine es SORE spe Sap hk Re ne sms eh bees PAE dds SEAT SINE OOL EW 6D LEI Sine 4 hd Cs GAA Ot 3 ify pane eet bs ve ha color of a rapid vl wit STALL THE THERMOSTAT ANGLE INSTALLATION GF THE TOR SPRAY PIER FAUCET USE METHOD
» Test method 1. Tum the faucet handle to the closed position, pane the water inlet valve, and check whether there is any leakage at all water inlet ports. 2. Open the faucet handle to the maximum; and open the water inlet valve to check whether there is leakage at the water outset and the sprinkler contention port. 3. Operate the reversing valve several limes to check the shower water condition and whether there is any leakage outside the connection. 4, If the water pressure is lower than 0.
