” F i This product has been inspected 1 and debugged by the factory to ! the best condition. Please do not |i | dissembler and assemble it ! yourself. 1. Installation dimension diagram. {The picture is for reference only, you can install it according to your own needs.) ng 48.21" Hot Cold Tile surface Ground 86.61" Before installing the product, please be sure to remove sundries and sludge from the peripheral fo prevent sundries farm blocking the product.
3. Put the valve body connected with the pipe against the wall, draw the outline with a pen and prepare for the slotting. 4. The wall is slotted and then drilled. 7.95" 4.05" 1 TH Lars 8" 177" Embedded depth 6. After the faucet is connected to the water pips, 7. There is no problem test the water normally, keep with the water test, the pressure for one minute, remove the handle and and check whither there is replace the protective any water leakage. cover, 5.
10. Apply FEET tape 10 the threaded end, 11, Apply FEET tape tithe threaded end, the fix the cover plate onto the shower arm the fix the cover plate onto the hand shower and screw the shower arm into the shower bracket and screw the hand shower bracket head outlet, and install the rain shower head. into the hand shower outlay. Finally, install the hand shower hose on the hand shower and the hand shower ] bracket respectively.
