Installation Instruction

22
EM Lock
6 GND- Black
7 LOCK RLY NO -Yellow
8 DOOR STATUS- White
9 LOCK RLY NC-Dark Blue
10
LOCK RLY COM - Light Brown
Diode
5
+12V LOCK- Red
CN3
1 GND- Black
2
GND- Black
3 GND LOCK- Black
4
EXIT SWITCH
-White
External Reader Cable
(8 Pin to 15 Pin connector)
Figure 16
Power
Cable
Micro USB
connector cable
Ethernet Cable
G
EM Lock Cable
F
Figure 15
21
1
DATA 0 - Green
2
DATA 1 - White
3
BEEPER - Yellow
4 GREEN LED - Orange
5
GND- Black
6
RS 232 RX- Pink
7
+12V RDR- Red
8 RS 232 TX- Grey
1 GND- Black
2+12VDC IN- Red
Power
External Reader
Figure 14
Connecting the Cables
• For Concealed wiring; first draw out sufficient length of the
cables from the hole you have made on the mounting
surface.
• Connect the Power, External Reader and EM Lock cable
assemblies to the 20 PIN connector affixed on the back side
of the COSEC ARGO Unit.
• Connect the Ethernet Cable to the LAN port.
• Connect the micro USB port to the Printer or Broadband
dongle. If required, use a micro USB cable extender.
CN1
CN2