COSEC VEGA CPM MIFARE SMART 1
TABLE OF CONTENT IMPORTANT SAFETY INSTRUCTIONS…………………..…Page No.3 GENERAL……………………………………………………………… Page No.4 SPECIFICATION…………………………………………………….. Page No.5 Pin Description………………………………………….…………..Page No.5 INSTALLATION ………………………………………………....… Page No.6 ANTENNA………………………………………………..…………… Page No.8 OPERATION ………………………………………………………… Page No.8 FCC REGISTRATION INFORMATION……………………… Page No.
IMPORTANT SAFETY INSTRUCTIONS When using your COSEC CPM MIFARE SMART Reader, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons. In addition, the following should also be followed: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. If necessary, use mild soap. 4.
GENERAL The MATRIX COSEC CPM MIFARE SMART MODULE is an elegant looking reader which can be mounted to metal door frame (mullion) or any flat wall surface. MATRIX COSEC CPM MIFARE SMART MODULE Reader uses an electronic module in epoxy potting that ensures successful operation even in harsh environments. The COSEC VEGA CPM MIFARE SMART MODULE design eliminates using external amplifiers, filters, antenna driver and even micro-controller. Approximately 6K flash memory is free for custom specific applications.
SPECIFICATION Model COSEC VEGA CPM MIFARE SMART Write/Read Range Power/Current Working Frequency 2-8 cm 5 - 5.5VDC (12VDC adapter through host product) 13.56 MHz Operating Temperature -40 to 85°C Dimension in mm 71.4 x 43.
Table1. Pin description...continued Pin 32 33 Symbol IRQ VSS Type O PWR Description interrupt request: output to signal an interrupt event ground and heat sink connection [1] This pin is used for connection of a buffer capacitor. Connection of a supply voltage might damage the device INSTALLATION Insert the RF reader module “COSEC VEGA CPM MIFARE SMART”, matching the connector pins on the module with those provided on the card reader slot. 1.
4. Press the free end of the module inwards with your fingertips to lock it in place as shown in figure. 5. Replace the back cover as shown in fugure.
ANTENNA COSEC VEGA CPM MIFARE SMART Antennas are PCB based with different dimensions and having around 2µH +/- 2% µH inductance. The module supports for different Matrix make antennas, the intentional radiator (COSEC VEGA CPM MIFARE SMART) may be operated with the antenna with which it is authorized.
FCC REGISTRATION INFORMATION 2.2 list of applicable FCC rules This device complies with part 15.225 of the FCC rules. 2.3 Summarize the specific operation use conditions This module can be used in household electrical appliances as well as lighting equipment’s. The input voltage to the module should be nominally 5.0 to 5.5V d.c., The ambient temperature of the module should not exceed 80˚C. The antenna is not field replaceable. If the antenna needs to be change, the certification should be reapplied. 2.
2.
To comply with the FCC RF exposure compliance requirements, this device and its antenna must not be co-located or operating to conjunction with any other antenna or transmitter, except if installed in compliance with FCC Multi Transmitter procedures. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
