Quick Installation Guide

8
7
Installation
Mounting Plate
Ÿ From the bottom of the COSEC ATOM RD200/300, unscrew
the Mounting screw with the help of screw driver as illustrated
in Figure 8.
Ÿ Separate the Mounting plate from the ATOM by pulling it
downwards. Refer, Figure 9 for the same.
Step 1: Removing the Mounting Plate
Figure 8
Figure 9
1) Installing the COSEC ATOM RD200/300: Wall Mounting
Step 2: Connecting the Cables
Ÿ You can mount COSEC ATOM RD200/300 in two ways :
Concealed Wiring or Non-concealed Wiring as explained
below.
A. Concealed Wiring
1. Take the Mounting Plate and trace screw holes A , B & C. Trace
out the area D also drill along the marking as shown below.
A
Figure 10
B
C
D
A
B
C
D