Quick Installation Guide

21
22
Mounting Plate
Ÿ From the top of the COSEC ATOM, unscrew the Mounting
screw with the help of screw driver as illustrated in Figure 24.
Ÿ Separate the Mounting Plate from the ATOM by pulling it
downwards. Refer, Figure 25 for the same.
Step 1: Removing the Mounting Plate
Figure 23
Figure 24
Figure 25
3) Installing the COSEC ATOM RD100
Step 2: Connecting the Cables
Ÿ You can mount COSEC ATOM in two ways : Concealed Wiring
or Non-concealed Wiring as explained below.
A. Concealed Wiring
1. Take the Mounting Plate and trace screw holes A & B. Trace
out the area C also drill along the marking as shown below.
A
B
A
B
C
C
Figure 26
C