User guide

59
GlobalFiler
™
Express PCR Amplification Kit User Guide
Chapter4 Analyze Data
Analyze and edit sample files with GeneMapper
®
ID-X Software
4
GeneMapper
®
ID-X Software
Analyze and edit sample files with GeneMapper
®
ID-X Software
1. In the Project window, select EditAdd Samples to Project, then navigate to the
disk or directory containing the sample files.
2. Apply analysis settings to the samples in the project.
Note: For more information about how the Size Caller works, refer to the
GeneScan
™
Analysis Software for the Windows
®
NT Operating System Overview of the
Analysis Parameters and Size Caller User Bulletin (Pub. no. 4335617).
Parameter Settings
Sample Type Select the sample type.
Analysis Method GlobalFilerExpress_AnalysisMethod_v3X (or the name of the
analysis method you created)
Panel GlobalFiler_Express_v1.1X
Size Standard GS600_LIZ_(60-460)
†
(or the name of the size standard you
created)
†The GlobalFiler
™
Express Kit was originally validated using the GeneScan
™
600 LIZ
®
Size Standard v2.0.
If you use the a different size standard, perform the appropriate internal validation studies to support
the use of this size standard with the GlobalFiler
™
Express Kit.