User guide

47
GlobalFiler
™
Express PCR Amplification Kit User Guide
Chapter4 Analyze Data
Set up GeneMapper
®
ID-X Software for data analysis
4
GeneMapper
®
ID-X Software
3. Check the version of files imported into the Panel Manager:
a. Select Panel Manager in the navigation pane.
b. Expand the Panel Manager folder and any sub-
folders to identify the analysis file version already
installed for your kit choice.
4. Check the version of files available for import into the
Panel Manager:
a. Select Panel Manager, then select FileImport Panels to open the Import
Panels dialog box.
b. Navigate to, then open the Panels folder and check the version of panel, bin,
and stutter files installed.
5. If newer versions are available on the website, download and import as described
below.
Import panels,
bins, and marker
stutter
Note: The AmpFLSTR v3X panel and bin files are automatically imported into the
GeneMapper
®
ID-X Software v1.4 database during installation. The v3X Stutter file is
also installed but must be imported before use.
To import the GlobalFiler
™
Express Kit panel, bin set, and marker stutter from our web
site into the GeneMapper
®
ID-X Software database:
1. Download and open the file containing panels, bins, and marker stutter:
a. Go to www.lifetechnologies.com/supportSoftware, Patches &
UpdatesGeneMapper
®
ID-X Software. Download the file AmpFLSTR
Analysis Files v3X.
b. Unzip the file.
2. Start the GeneMapper
®
ID-X Software, then log in with the appropriate user
name and password.
IMPORTANT! For logon instructions, refer to the GeneMapper
®
ID-X Software
Version 1.0 Getting Started Guide (Pub. no. 4375574).
3. Select ToolsPanel Manager.
4. Find, then open the folder containing the panels, bins, and marker stutter:
a. Select Panel Manager in the navigation pane.
b. Select FileImport Panels to open the Import
Panels dialog box.
c. Navigate to, then open the AmpFLSTR Analysis
Files v3X folder that you unzipped in step 1 on
page 47.