User`s guide

setxpcenv
Environment Property Description
TcpIpTargetBusType
Values are 'PCI' and 'ISA'.
From the xPC Target Explorer window TcpIp target bus
type list, select either
PCI or ISA. This property is set by
default to
PCI, and determines the bus type of your target
PC. You do not need to define a bus type for your host PC,
which can be the same or different from the bus type in
your target PC.
If
TcpIpTargetBusType is se t to PCI , then the properties
TcpIpISAMemPort and Tcp IpISAIRQ have no effect on
TCP/IP com munication.
IfyouareusinganISAbuscard,set
TcpIpTargetBusType
to ISA and enter values for TcpIpISAMemPort and
TcpIpISAIRQ.
TcpIpTargetDriver
Values are 'NE2000' , 'SMC91C9X', 'I82559', 'RTLANCE',
'R8139', '3C90x',and'NS83815'.
From the xPC Target Explorer window TcpIp target
driver list, select
NE2000, SMC91C9X, I82559, RTLA NCE ,
R8139, 3C90x ,orNS8 3815 . The Ethernet card provided with
the system uses the
NE2000 driver .
TcpIpTargetPort
Value is 'xxxxx'.
In the xPC Target E xplo rer window TcpIp target p ort
box, enter a value greater than
20000.
This property is set by default to
22222 and should not
cause any problems. The number is higher than the
reserved area (
telnet, ftp, ...) and it is only of use on the
target PC.
18-137