User`s guide

setxpcenv
Environment Property Description
TcpIpGateway
Value is 'xxx.xxx.xxx.xxx'.
In the xPC Target E xplo rer window TcpIp gateway
address box, enter the IP address for your gateway. This
property is set by default to
255.255.255.255,which
means that a gateway is not used to connect to the target
PC.
If you com municate with your target PC from within a LAN
that uses gateways, and your host and target computers
are connected through a gateway, then you need to enter a
value for this property. If your LAN does not use gateways,
you do not need to change this property. Ask your system
administrator.
TcpIpSubNetMask
Value is 'xxx.xxx.xxx.xxx'.
In the xPC Targ et Explorer window LAN subnet m ask
address text box, enter the subne t mask of your LAN. Ask
your system administrator for this value.
Forexample,yoursubnetmaskcouldbe
255.255.255.0.
TcpIpTargetAddress
Value is 'xxx.xxx.xxx.xxx'.
In the xPC Target Explorer window Target P C IP
address box,enteravalidIPaddressforyourtargetPC.
Ask your system administrator for this value.
For example,
192.168.0.10.
18-136