User`s guide

setxpcenv
Environment Property Description
TargetRAMSizeMB
Values are 'Auto' and 'Manual'.
From the xPC Target Explorer window Target RAM size
list, selec t e ith er
Auto or Manual.IfyouselectM anua l,
enter the amount of RAM, in megabytes, installed on the
target PC. This property is s et by default to
Auto.
Target RA M size defines the total amount of installed
RAM in the target PC. T his RAM is used for the kernel,
target application, data logging, and other functions that
use th e heap.
If Target RAM size is set to
Auto, the target application
automatically determines the amount of memory up to 64
MB. If the target PC does not contain more than 64 MB of
RAM,oryoudonotwanttousemorethan64MB,select
Auto. If the target PC has more than 64 MB of RAM, and
you want to use more than 64 MB, select
Manual,andenter
the amount of RAM installed in the target PC.
TargetScope
Values are 'Disab led' and 'Enabled'.
From the xPC Target Explorer window Enable target
scope list, select either
Enabled or Disabled.
The property
TargetScope is set by default to Enabled.If
you set
TargetScope to Disabled,thetargetPCdisplays
information as te xt.
To use all the features of the target scope, you also need to
install a keyboard on the target PC.
18-135