User`s guide

setxpcenv
Environment Property Description
RS232HostPort
Values are 'COM1' and 'COM2'.
From the xPC Target Explorer window Host port list,
select e ither
COM1 or COM 2 for the connection on the
host computer. The xPC Target software automatically
determines the COM port on the target PC.
Before you can select an RS-232 port, you need to set the
HostTargetComm property to RS232.
SecondaryIDE
Values are 'off' and 'on'. Set this value to 'on' only
if you want to use the d isks connected to a secondary
IDE controller. If you do not have disks co n ne cted to the
secondary IDE controller, leave this value set to
'off'.
TargetBoot
Values are 'BootFloppy', 'CDBoot ', 'DOSLoader',
'NetworkBoot',and'StandAlo ne'.
From the xPC Targe t Explorer window targ et PC
configuration pane, select one of the f o ll owing tabs: Boot
Floppy, CD Boot, DOS Loader, Network Boot,or
Standalone.
If your license file does not include the license for the xPC
Target Em bedde d Option product, your only options are
BootFloppy, CD Boot , DOSLoader,andNetwor kBoo t.With
the xPC Target Em bedde d Option product licensed and
installed, you have the additional choice of
Standalone.
TargetMACAddress
Physical target PC MAC address w hen booting within a
dedicated netwo rk.
18-134