User`s guide

setxpcenv
Environment Property Description
MaxModelSize
BootFloppy and DOSLoader modes ignore this value.
Values are
'1MB', '4 MB',and'16MB'.
From the xPC Target Explorer window Maximum model
size list, select either
1MB, 4MB,or16 MB. This value is
unavailable for BootFloppy or DOSLoader modes.
Choosing the maximum m odel size reserves the specified
amount of memory on the target PC for the target
application. The remaining memory is used by the kernel
and by the heap for data logging.
Selecting t oo high a value leaves less memory for data
logging. Selecting too low a value does not reserve enough
memory for the target application and creates an error.
MulticoreSupport
Values are 'off ' and 'on'. If your targ et PC has multicore
processors, set this value to
'on' to take advantage of
these processors for background tasks. Otherwise, set this
value to
'off'.
NonPentiumSupport
Values are 'off' (def ault) and 'o n'. Set this value to
'off' if your target PC has a 386 or 486 compatible
processor. O t herw ise , set it to
'on'. If your target PC has
a Pentium or higher compatible process or, selecting this
check box will slow the perfo rmance of your target PC.
RS232Baudrate
Values are ' 115200', '57600', '38400', '19200', '960 0',
'4800’, '2400',and'1200'.
From the Baud rate list, select
115200, 57600, 38400,
19200, 9600, 4800, 2400,or1 200.
18-133