User`s guide

setxpcenv
Environment Property Description
CDBootImageLocation
Location of cdboot.i so file for creation of CD target boot
disk.
CompilerPath
Value is a valid compiler root folder. Enter the path where
you installed a Watcom C/C++ or Microsoft Visual Studio
C/C++ compiler.
If the path is invalid or the folder d oe s n ot co ntain the
compiler, an error mes sag e appears when you use the
function
updatexpcenv or build a target application.
DOSLoaderLocation
Location of DOSLoade r files t o boo t target PCs from devices
other than 3.5–inch disk or CD.
EmbeddedOption
Values are 'Disabled' and 'Enabled'. This property is
read only.
Note that the xPC Target Embedded Option product is
enabled only if y ou purchase an additional license.
EthernetIndex
Value is ’n’, where n indicates the index number for the
Ethernet card on a target PC. Note that the
(n-1)th
Ethernet card on the target PC has an index number 'n'.
The defau lt index numbe r is 0.
If the target PC has multiple Ethernet cards, you must
select the appropriate card f or networking with the host
PC. This option returns the index number of the card
selected on the target PC upon booting.
HostTargetComm
Values are 'RS232' and ' Tcp Ip'.
From the xPC Target Explorer window Host target
communication list, select either
RS232 or TCP/IP.
If you select
RS232, you also need to se t the property
RS232HostPort.IfyouselectTCP/IP, then you also need to
set all properties that start with
TcpIp.
18-132