User`s guide

set (scope object)
Property Description Writable
Signals
List of signal indices from the target object
to display on the scope.
Yes
Status
Indicate whether data is being acquired,
the scope is waiting for a trigger, the
scope has been stopped (interrupted),
or acquisition is finished. Values
are
'Acquiring', 'Read y for being
Triggered'
, 'Interru pted ',and
'Finished'.
No
Time
Contains the time data for a single data
package from a scope.
No
TriggerLevel
If TriggerMode is 'Signal',indicatesthe
value the signal has to cross to trigger the
scope and start acquiring data. The trigger
level can be crossed with either a rising or
falling signal.
Yes
TriggerMode
Trigger mode for a scope. Valid values
are
'FreeRun' (default), 'Software',
'Signal',and'Scope'.
Yes
TriggerSample
If TriggerM ode is 'Scope',then
TriggerSample specifies which sample
of the triggering scope the current
scope should trigger on. For example, if
TriggerSample is 0 (default), the current
scope triggers on sample
0 (first sample
acquired) of the triggering scope. This
means that the two scopes will be perfectly
synchronized. If
TriggerSample is 1,the
first sample (sample
0) of the current scope
will be at the same instant as sample
number 1 (second sample in the acquisition
cycle) of the triggering scope.
Yes
18-121