User`s guide

set (env object)
Environment Property Descrip tion Writable
in your target PC, choose another
I/O po r t base address and mak e the
corresponding changes to your jumper
settings.
TargetMACAddress
Physical target PC MAC address
when booting within a dedicated
network.
Yes
CCompiler
Values are 'Watcom' and 'VisualC'.
From the x PC Target Explorer
window compiler list, select either
Watcom or VisualC.
Yes
CompilerPath
Value is a valid compiler root folder.
Enter the path where you installed
a Watcom C/C++ or Microsoft Visual
Studio C/C++ compiler.
If the path is invalid or the folder does
not contain the compiler, an error
message appears when y ou use the
function
updatexpcenv or build a
target application.
Yes
TcpIpTargetISAIRQ
Value is 'n',wheren is between 4
and 15.
If you are using an ISA bus Ethernet
card, you must enter values for the
properties
TcpIpISAMemPort and
TcpIpISAIRQ. The values of these
properties must correspond to the
jumper settings or ROM settings o n
the ISA-bus Ethernet card.
On your ISA bus card, assign an IRQ
and I/O-port base address by moving
the jumpers on the card.
Yes
18-113