User`s guide

set (env object)
Environment Property Descrip tion Writable
TcpIpTargetBusType
Values are 'PCI' and 'ISA'.
From the x PC Target Explorer
window TcpIp target bus type
list, select either
PCI or ISA.This
property is set by default to
PCI,and
determines the bus type of your target
PC. You do not need to define a bus
typeforyourhostPC,whichcanbe
thesameordifferentfromthebus
type in your target PC.
If
TcpIpTargetBusType is set to PCI,
then the properties
TcpIpISAMemPort
and TcpIpISAIRQ hav e n o effect on
TCP/IP communication.
If you are using an ISA bus card,
set
TcpIpTargetBusType to ISA and
enter values for
TcpIpISAMemPort
and TcpIp ISAI RQ.
Yes
TcpIpTargetISAMem Port
Value is '0xnnnn'.
If you are using an ISA bus Ethernet
card, you must enter values for the
properties
TcpIpISAMemPort and
TcpIpISAIRQ. The values of these
properties must correspond to the
jumper settings or ROM settings o n
your ISA bus Ethernet card.
On your ISA bus card, assign an IRQ
and I/O port base address by moving
the jumpers on the card.
SettheI/Oportbaseaddressto
around 0x300. If one of these
hardware settings leads to a conflict
Yes
18-112