User`s guide

getxpcenv
Environment P rope rty Description
TcpIpSubNetMask
Value is 'xxx.xxx.xxx.xxx' .
In the xPC Target Explorer window LAN subnet
mask address text box, enter the subnet mask of your
LAN. A sk your system administrator for this value.
For example, your subnet mask could be
255.255.255.0.
TcpIpTargetAddress
Value is 'xxx.xxx.xxx.xxx' .
In the xPC Target Explorer w indow Target PC IP
address box , enter a valid IP addres s for your target
PC. Ask your system administrator for this value.
For example,
192.168.0.10.
TcpIpTargetBusType
Values are 'PCI' and 'IS A'.
From the xPC Target Explorer window TcpIp target
bus type list, select either
PCI or ISA. This property is
set by de fault to
PCI, and determines the bus type of
your target PC. You do not need to define a bus type for
your host PC, which can be the same or different from
the bus type in your target PC.
If
TcpIpTargetBusType is set to PCI, then the
properties
TcpIpISAMemPort and TcpIpISAIRQ have no
effect on TC P/IP communication.
IfyouareusinganISAbuscard,set
TcpIpTargetBusType to ISA and enter values
for
TcpIpISAMemPort and TcpIpISAIR Q.
18-75