User`s guide

getxpcenv
Environment P rope rty Description
memory up to 64 MB. If the target PC does not contain
more than 64 MB of R AM, or yo u do not want to use
more than 64 MB, select
Auto. If the target PC has
more than 64 MB of RAM, and you want to use more
than 64 MB, select
Manual, and enter the amount of
RAM installed in the target P C.
TargetScope
Values are 'Disabl ed' and 'Enabled'.
From the xPC Target Explorer window Enable target
scope list, select either
Enabled or Disabled.
The property
TargetScope is set by default to Enabled.
If you set
TargetScope to Disabl ed,thetargetPC
displays information as text.
To use a ll the features of the target scope, you also
need to install a keyboard on the target PC.
TcpIpGateway
Value is 'xxx.xxx.xxx.xxx' .
In the xPC Target Explorer window TcpIp gateway
address box, e nter the IP address for your gatew a y.
This property is set by default to
255.255.255.255,
which means that a gateway is not used to connect to
the target PC.
If you communicate with your target PC from within
a LAN tha t uses gatew a ys, and your host and target
computers a re connected through a gateway, then you
need to enter a va lue for this property. If your LAN
does not use gateways, you do not need to change this
property. Ask your system administrator.
18-74