User`s guide

getxpcenv
Environment P rope rty Description
SecondaryIDE
Values are 'off' and 'on'.Setthisvalueto'on' only
if you want to use the disks connected to a secondary
IDE controller. If you d o not have disks connected to
the secon dary IDE controller, leave this value set to
'off'.
TargetBoot
Values are 'BootFloppy', 'CDBoot', 'DOSLoader',
'NetworkBoot',and'StandAlone'.
From the xPC Target Ex plore r window target PC
configuration pane, select one of the fo ll owing tabs:
Boot Floppy, CD Boot, DOS Loader, Network
Boot,orStandalone.
If your license file does not include the license for
the xPC Target Embedded Option p roduct, your only
options are
BootFloppy, CDBoot, DOSLoader,and
NetworkBoot. With the xPC Target Embedded Option
product licensed and installed, you have the additional
choice of
Standalone.
TargetMACAddress
Physical target PC MAC address when booting within
a d edicated netw ork.
TargetRAMSizeMB
Values are 'Auto' and ' Manual'.
From the xPC Targ et Ex plore r w indow Target RAM
size list, s elect either
Auto or Manual.Ifyouselect
Manual, enter the amount of RAM, in m egabytes,
installed on the target PC. This property is set by
default to
Auto.
Target RAM size defines the total amount of installed
RAM in the target PC. This RAM is u sed for the kernel,
target application, data logging, and other functions
that use the heap.
If Target RA M size is set to
Auto,thetarget
application automatically determines the amount of
18-73