User`s guide

getxpcenv
Environment P rope rty Description
enough memory for the target application and creates
an error.
Note, you cannot build a 16 MB target application to
runinStandAlonemode.
MulticoreSupport
Values are 'off' and 'on'.IfyourtargetPChas
multicore processors, set this va lu e to
'on' to take
advantage of these processors for background tasks.
Otherwise, set this value to
'off'.
Name
Target PC name.
NonPentiumSupport
Values are 'off' (default) and 'on'. Set this value to
'off' if your target PC has a 386 or 486 compatible
processor. O therwise, set it to
'on'.Ifyourtarget
PC has a Pentium or higher compatible processor,
selecting this check box will slow the performance of
your target PC.
RS232Baudrate
Values are '115200', '57600', '38400', '192 00',
'9600', '4 800’, '2400',and'1200'.
From the Baud rate list, select
115200, 57600, 38400,
19200, 9600, 4 800, 2400,or1200.
RS232HostPort
Values are 'COM1' and 'COM2'.
From the xPC Target Explorer window Host port list,
select either
COM1 or COM2 for the connection on the
host computer. The xPC Target software automatically
determines the COM port on the target P C.
Before you can select an RS-232 port, you need to set
the
HostTargetComm property to RS232.
18-72