User`s guide

get (scope object)
Property Description Writable
As a special case, setting TriggerSample to
-1 means that the current scope is triggered
at the end of the acquisition cycle o f the
triggering scope. Thus, the first sample of the
triggering scope is acquired one sample after
the last sample of the triggering scope.
TriggerScope
If TriggerMode is 'Scope', identifies the
scope to use for a trigger. A scope can be set
to trigger when another scope is triggered.
Youdothisbysettingtheslavescopeproperty
TriggerScope to the scope index of the master
scope.
Yes
TriggerSignal
If TriggerM ode is 'Si gnal', id entifies the
block output signal to use for triggering the
scope. You identify the signal with a signal
index from the target object property
Signal.
Yes
TriggerSlope
If TriggerMode is 'Signal', indicates whether
the trigger is on a rising o r falling signal.
Values are
'Either' (default), 'Rising',and
'Falling'.
Yes
Type
Determines whether the scope is displayed on
the host computer or on the target computer.
Values are
'Host', 'Target',and'File'.
No
18-46