User`s guide

get (env object)
Environment Property Description Writable
another IRQ and make the corresponding
changestoyourjumpersettings.
TcpIpTargetISAMem Port
Value is '0xnnnn'.
IfyouareusinganISAbusEthernetcard,
you must enter values for the properties
TcpIpISAMemPort and TcpIpISAIRQ.The
values of these properties must correspond
to the jumper settings or ROM settings on
your ISA bus Ethernet card.
On your ISA bus card, assign an IRQ and
I/O port base address by moving the jumpers
on the card.
Set the I/O port base address to around
0x300. If one of these hardware settings
leads to a confli ct in y ou r ta rget PC, choose
another I/O port base address and make
the corresponding changes to your jumper
settings.
Yes
TargetMACAddress
Physical target PC MAC address when
booting within a dedicated network.
Yes
CCompiler
Values are 'Watcom' and 'VisualC'.From
the xPC Target Explorer window com piler
list, select either
Watcom or VisualC.
Yes
CompilerPath
Value is a valid compiler root folder. Ente r
the path where you installed a Watcom
C/C++ or Microsoft Visual Studio C/C++
compiler.
If the path is invalid or the folder does not
contain the compiler, an error message
appears when you use the function
updatexpcenv or build a target application.
Yes
18-37