User`s guide

get (env object)
Environment Property Description Writable
TcpIpTargetBusType
Values are ' PCI' and 'ISA'.
From the xPC Target Explorer window
TcpIp target bus type list, select either
PCI or ISA. This property is set by default
to
PCI, and determines the bus type of your
target PC. You do not nee d to define a bus
typeforyourhostPC,whichcanbethe
same or different from the bus type in your
target PC.
If
TcpIpTargetBusType is set to PCI,
then the properties
TcpIpISAMemPort and
TcpIpISAIRQ have no ef fect o n TCP/IP
communication.
IfyouareusinganISAbuscard,
set
TcpIpTargetBusType to ISA and
enter v alues for
TcpIpISAMemPort and
TcpIpISAIRQ.
Yes
TcpIpTargetISAIRQ
Value is 'n',wheren is between 4 and 15.
IfyouareusinganISAbusEthernetcard,
you must enter values for the properties
TcpIpISAMemPort and TcpIpISAIRQ.The
values of these properties must correspond
to the jumper settings or ROM settings on
the ISA-bus Ethernet card.
On your ISA bus card, assign an IRQ
and I/O-port base address by moving the
jumpers on the card.
MathWorks recommends setting the IRQ to
5, 10, or
11. If one of these h ardware settings
leads to a confli ct in y ou r ta rget PC, choose
Yes
18-36