User`s guide

get (env object)
Environment Property Description Writable
MaxModelSize
BootFloppy and DOSLoader modes ignore
this value.
Values are
'1MB', '4MB',and'16 MB'.
From the xPC Target Explorer window
Maximum model size list, select either
1
MB
, 4MB,or16 MB. This value is unavailable
for BootFloppy or DOSLoader modes.
Choosing the maximum model size reserves
the specified amount of memory on the
target PC for the target application. The
remaining m emory is used by the kernel
and by the heap for data logging.
Selecting too high a value leaves less
memory for data logging. Selecting too low a
value does not reserve eno ug h memory for
the target application and creates an error.
Note that you cannot build a 16 MB target
application to run in StandAlone mode.
Yes
SecondaryIDE
Values are 'Off' (default) and 'On'.
Select this check box only if you want to
use the disks connected to a secondary
IDE controller. If you do not have disks
connected to the se condary IDE controller,
do not select this check box.
Yes
18-31