User`s guide

15 Frequently Asked Questions
Installation, Configuration, a nd Build Troubleshooting
In this section...
“Troubleshooting xpctest Results” on page 15-12
“Troubleshooting Build Issues” on page 15-19
Troubleshooting xpctest Results
The following are some issues you might encounter while running xpctest
to check the xPC Target installation and configuration. xpctest runs eight
subtests.
• “xpctest: Test 1 Fails” on page 15-12
• “xpctest: Test 2 Fails” on page 15-13
• “xpctest: Test 3 Fails” on page 15-14
• “xpctest: Test 4 Fails” on page 15-15
• “xpctest: Test 5 Fails” on page 15-16
• “xpctest: Test 6 Fails” on page 15-17
• “xpctest: Test 7 Fails” on page 15-17
• “xpctest: Test 8 Fails” on page 15-18
This topic assumes that you have read “Testing and Troubleshooting the
Installation” in the xPC Target Getting Started Guide.
xpctest: Test 1 Fails
First, perform the procedure described in the “Test 1, Ping Target System
Standard Ping” section in the xPC Target Getting Started Guide.
Note You can ignore this topic i f you are using a serial connection. Test
1 is skipped for serial connections.
15-12