User`s guide

Communications
such an event, you need to reboot the target and reestablish communication
between the host PC and target PC.
To get yourself back up and running,
1 Remove the reference to the problem driver from the model.
2 Reboot the target PC.
3 At the MATLAB command line, issue xpc targetping to reestablish
communications.
4 If the driver w ith which you are having proble ms is one provided by
MathWork s, try to pinpoi nt the problem area (for exam p le, determine
whether certain settings in the driver block cause problems).
Alternatively, you can exit and restart the MAT LAB interface.
How Can I Diagnose Network Problems with the
xPC Target System?
If you experience network problems when using this product,
refer to the MathWorks Support xPC Target Web site
(
http://www.mathworks.com/support/product/XP). This Web
site has the most up-to-date information about this topic.
15-11